Pulp and paper equipments


This category shows different examples of equipment designed and manufactured for the pulp and paper indusries. These examples of product have been selected to show our presence in all departments of paper mill.

Whether the arrival of chips to the instruments used to verify the quality of the rolls, Genmec is able to realize all projects related to this industry.

All devices manufactured at Conseil Genmec inc. are tailored to specific customer needs. It is therefore possible to modify in part or in whole apparatus represented on this site.

Reel


Systech designs, manufactures and modifies reels to adapt to existing equipments.
»» Full description

Rebuilt winder


Systech can support, modification, improvement and increased performances from your winder and rewinder.
»» Full description

Out-of-round measurment device


This device is used to check the deformation level of the paper roll after handling. It is light and does not take much space because of its used
»» Full description

Diameter measurment device


this device is installed directly in the finishing line to check the diameter of the paper roll before the wrapping operation.
»» Full description

Tail strainer


This device is made up of three parts:The sheet treader is a powered roller that enters the sheet point automatically in the winder by pressing it against the
»» Full description

Handling equipment


Systech has developed and implemented various trolleys for large rollers or where a long pièce has to move in tight spaces requiring a mechanism that plays on the turning radius of the
»» Full description

Core chuck


Designes to replace shaft mechanism, this device permits considerable time saving in addition to sparing workers potential injuries due to the removla of the shaft that holds the
»» Full description

Pull roll


This equipment is used to adjust and maintain a tension on the sheet of paperboard just before the cutting rollers.
»» Full description

Conveyor


Whether a belt conveyor, slates conveyors, roller conveyors, or vibratory conveyor, Systech makes the design and manufacture in accordance with customer specifications.
»» Full description

Turntable


This rotary table is used to rotate the position of a roll. This rotary table is a endow Lag type device cradle that slowed the movement of the
»» Full description

Reel spool starter


This reel spool stater is used to start the spool to reach the sheet speed.
»» Full description

Tail cutter (wet end)


this device is used to cut a narrow band which permits gradual insertion of the sheet into the press.
»» Full description

Tail Cutter (dry end)


This compact devise is used to cut a narrow band which permits gradual insertion of the sheet in the calender. You don't need an experienced operator for this process.
»» Full description

Core Room


Systech design, build and if you need modify partly or wholly your core room. A core room includes: the feed conveyor the automatique,semi-automatic or manual core saw  for core of diameter between
»» Full description

Rolls press for heating plates


Device designed to glue the paperboard caps on the paper rolls by press operation.
»» Full description

Trim squirt adjusting device


Device comprising two jets of water which are ajustable across the paper or board machine and which divide the wet web on the wire lengthwise so that the
»» Full description

Solid particle conveyor


Conveyor used to make the ongoing maintenance of under floor chanels.A conveyor scrapers removes solid particles that clog the mesh surface of the conveyor to permit only the
»» Full description

Automatic core distributor


If the configuration of winder allows, this device is used to insert fiberboard cores while the rolls of paper are not yet withdrawn  
»» Full description

Illuminating table for visual inspection


Table that allows to observe the defaults of a translucent product as a sheet. This table project a uniform light above and/or bellow the product to be inspected.
»» Full description

Trim collector


installed on each side of the cutting table, this mechanism serves to guide the trim outside of the winder.
»» Full description

Winder sheet cutter


The cutting operation is made during the operation of rolls ejection. As we eliminate the manual cutting operation, the cycle time is considerably reduced.
»» Full description

Roll shock absorber


mechanism used to reduce the speed of the roll. With this product, we extend the maintenance on the equipements.
»» Full description

Spreader bar adjuster


This mecanism change the curve of the bar to separate the roll on the winder. We can use the preset program or adjust it manually.
»» Full description

Rolls stoppers and kickers


Those equipment are used to decelerate, move and stop the rolls. They can be designed to be under or on the operation floor.
»» Full description

Powerful cleaner


This vacuum cleaner has been designed to collect the dust and particles at the places where it is difficult to reach, for exemple, the carbon dust accumulated in
»» Full description

Unwinding stand


this device makes unwinding of ejected reels possible without using cutting blades, thus eliminating the risk of injuries. The core can recovered without being damaged.
»» Full description

Unreeling stand


This device is used to start the unwinding process of paper toward the pulper,then regulates the speed by a braking process.
»» Full description

CONSEIL GENMEC INC. 418 659-1112 • Tous droits réservés 2012
Propulsé par Amiral Agence Web